Universal Laser Systems X2-600 User's Guide download pdf (Page 18)

Link to Table of Contents

User Guide

User Manual

LET’S GET STARTED!

The User Guide is designed to provide you with information on how to operate your Universal laser system. The Users

Guide section will walk you through System Operation, Accessories, and Basic Maintenance.

Laser System Operation

The Universal Control Panel (UCP)

CAUTION: Please refer to the Safety Manual before operating the laser system.

Viewer Tab

(page 25)

You send jobs to your laser system by printing to it. Anytime you print to the laser system, a job is created and inserted

into the laser systems job queue. Selecting the viewer tab allows you to navigate through and manage the jobs in

the laser system job queue. The viewer tab also allows you to operate your laser system right from your computer.

System Tab (page 29)

Diagnostics Tab (page 35)

The System Tab allows you to congure certain features of the laser system. If your laser system needs to be calibrated,

you will need to do so from this tab.

The Diagnostics Tab gives you important information about your laser system for troubleshooting purposes. When

calling the Customer Service Department, please have the laser system serial number available.

Figure 1

Figure 2

From the Universal Control Panel menus and buttons to the laser system keypad and basic printer driver features, this

section describes many of the features of the laser system. If you have not done so already, power ON your computer

and let it boot up completely. You do not need to turn on your exhaust system at this time.

The Universal Control Panel (UCP) on the computer provides a convenient interface for

interacting with and controlling your laser system. Once you have installed the UCP using the

installation disk, a red diamond-shaped icon (Figure 1) will appear in the lower right corner of

your Windows taskbar. If for any reason the UCP is deactivated, you can reactivate it by

double-clicking on the shortcut (Figure 2) found on your computer’s desktop screen. The UCP is

organized into three convenient tabs: Viewer, System and Diagnostics. The following describes the

features of each tab of the UCP.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 118 119

No comments

Universal Laser Systems X2-600 User's Guide Page 18