Universal Laser Systems X2-600 Troubleshooting Guide download pdf (Page 117)

Appendix B - Specifications

Model Number X-600 or X2-600

Resolution 1000 x 1000 DPI, 500 x 500 DPI, 333 x 333 DPI, 250 x 250 DPI

200 x 200 DPI, Draft

Computer Interface Windows 95, 98, and HPGL

Table Size 37” x 23” (939.8 mm x 584.2 mm)

Work Area 32” x 18” (812.8 mm x 457.2 mm)

Maximum Part Size 37” (939.8 mm) wide x 23” (584.2 mm) deep x 9” (228.6mm) tall

Laser Source(s) 15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge

(X2-600 only) 15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge (Laser #2)

Lenses Available Focal Length / Spot Size / (Standard or Optional)

1.5” (38.1mm) / 0.003 inches (.08 mm) / Optional

2.0” (50.8mm) / 0.005 inches (.13mm) / Standard

2.5” (63.5mm) / 0.007 inches (.18 mm) / Optional

4.0” (101.6mm) / 0.013 inches (.33 mm) / Optional

Interfaces Centronics parallel, RS232C Serial

Memory Buffer Multiple file / Single file / Auto Start modes, automatic data compression

Dimensions 38” high x 44” wide x 38” deep (965 x 1117 x 965mm)

Weight 320 lbs. (145 kg)

Safety Class IIIa interlocked safety enclosure

Available Options Rotary Fixture, Air Assist, Honeycomb Cutting Table

Facility Requirements

Power (X-600) Single Phase 110/220V AC, 15/8 Amp, 50/60 Hz

(X2-600) Single Phase 220V AC, 8 Amp, 50/60 Hz

Exhaust Outside exhausting required, two 4” connections,

500 CFM minimum (250 at each connection) at 6 inches static pressure

(425m

/hr at 1.5kPa)

Cooling Air cooled (ambient temperature 50ºF (10ºC) to 95ºF (35º C)

Specifications are subject to change without notice.

1 2 ... 112 113 114 115 116 117 118 119 120 121

No comments

Universal Laser Systems X2-600 Troubleshooting Guide Page 117